error 28035 %windir%\adam

HI

After a long time , i got solution for this error resolving in windows 7, i had seen many blog about this issue


please download this file http://download.microsoft.com/download/7/3/9/73982B95-A8C9-4B6C-BD85-6EC620BB0A7A/Windows6.1-KB975541-x86.msu


I hope this will solve your problem

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

SNMP CONFIGURATION

Me And My Friend Had worked on SNMP In VMware It's working .....
Enabling SNMP access and trap forwarding for VMware
IBM® Director 5.10.3 supports SNMP access and trap forwarding on VMware ESX Server, and will inter-operate with the ucd-snmp versions that ship with VMware ESX Server version 2.5.2 and 3.0.

These instructions apply only to using IBM Director SNMP support on VMware ESX Server.
Complete the following steps to enable SNMP access and trap forwarding for managed systems running VMware:
Download the net-snmp-5.2.1.tar.gz file from the Net-SNMP Web site at www.net-snmp.org/download.html.
Build and install the Net-SNMP libraries using the following steps.
Notes:
This procedure does not perform a full installation of Net-SNMP, but installs only the Net-SNMP libraries, which are required for IBM Director Core Services SNMP functions.
Refer to the INSTALL and README files included in the net-snmp-5.2.1.tar.gz package for additional installation information.
Untar the source files. Type the following command and press Enter.
tar -xvzf net-snmp-5.2.1.tar.gzChange to the source directory. Type the following command and press Enter.
cd net-snmp-5.2.1Build the Net-SNMP libraries with default options. Type the following commands (press Enter after each).
./configure --with-defaults
makeInstall the Net-SNMP libraries only to /usr/local/lib. Type the following command and press Enter.
make installlibsTo enable trap forwarding, edit the /etc/init.d/dacimlist file and uncomment the following two lines two lines in the SNMP End Consumer section.
LD_LIBRARY_PATH=/usr/local/lib
export LD_LIBRARY_PATHNote: The configuration changes will not take effect until you restart the cimlistener daemon in step 7.
To enable SNMP access, edit the /etc/init.d/dasnmp file and uncomment the following two lines in the section regarding the location of the net-snmp libraries.


LD_LIBRARY_PATH=/usr/local/lib


export LD_LIBRARY_PATHConfigure the SNMP daemon that ships with VMware to support AgentX agents. For details, see the VMware documentation at www.vmware.com/support/pubs/esx_pubs.html.


Create the file /usr/local/share/snmp/snmpd.conf to specify trapsink and trapcommunity settings. You might have to create the directory. This file should contain only settings for trapcommunity and trapsink.
 Specify a trap community value by adding a line containing the word trapcommunity followed by a space and the trapcommunity value, as in the following example.
trapcommunity publicSpecify a trapsink value for each destination to which IBM Director will send SNMP traps. Add a line containing the word trapsink followed by a space and the trapsink value, as in the following example.
trapsink 192.168.1.1Restart the cimlistener daemon by typing the following commands and pressing Enter after each:
/etc/init.d/dacimlist stop
/etc/init.d/dacimlist startRestart the IBM Director AgentX subagent by typing the following commands and pressing Enter after each:
/etc/init.d/dasnmp stop
/etc/init.d/dasnmp start

Installing NETWORK FILE Server

(Note: NFS Server works on Windows 2003 R2 with Service pack 2 & Windows 2008  )

1. On the Windows 2003 Server make sure “Microsoft Services for NFS” in installed. If not you need to add it under Add/Remove Programs, Windows Components, Other Network File and Print Services
2. Next go to folder you want to share and right-click on it and select Properties
3. Click on the NFS Sharing tab and select “Share this Folder”
4. Enter a Share Name, check “Anonymous Access” and make sure the UID and GID are both .
5. In Virtual Center, select your ESX server and click the “Configuration” tab and then select “Storage”
6. Click on “Add Storage” and select “Network File System” as the storage type
7. Enter the Windows Server name, the folder (share) name and a descriptive Data store Name
8. Once it finishes the configuration you can now map your VM’s CD-ROM devices to this new VMFS volume
Note: It is assumed that you have already installed Active Directory and DNS with the correct configuration.
Open the Control Panel and then start the Add/Remove Programs utility. After it has started select from the left panel “Add/Remove Windows Components.”

This will open a new panel. A list of components will be presented. Those components that already have a checkmark in the box at their left are already installed. Scroll down until you find the entry for ‘Other Network File and Print Services.’ (Why NFS is lumped in with Print Services is unknown, but this arrangement does change with the next Server release.)

Now select the Details button. A new window will open titled “Other Network File and Print Services.”

From this Window choose “Microsoft Services for NFS” and choose Details again. Yet another window will open, showing all of the available components related to NFS, titled ‘Microsoft Services for NFS.’

In the ‘Microsoft Services for NFS’ window you will select all of the components that you need to support your local configuration. You should check all of the available selection boxes in a typical situation because all of these components will be needed. If you are not going to use UNM because all of your client machines are now Windows Vista then you won’t need to select User Name Mapping. Once all of the choices are made, click on OK (several times) to begin the installation/activation.

MOSS How to ...: Installing SharePoint 2010 on Windows 2008 Server R2

MOSS How to ...: Installing SharePoint 2010 on Windows 2008 Server R2